Rebuilt 1989 Ford 460 EFI (7.5L) by Blue Weber at Warlock Ltd in Charlotte, NC. This guy is 1 of 25 nationwide on the board at ASE that makes up the questions on the Machinists exam. He knows his stuff.
Bored .030 over, low RPM cam (466CI), in 2004.
Drivetrain:
New rebuilt C6 (2004)
New rebuilt electric BW1356 (2004)
Dana 44 IFS up front,
Corporate 14 bolt in back (2006)
Rear disk brakes (2006)
Notes:
3 core Modine radiator
Rear hangar swap and shackle flip
6 inch Rough Country suspension lift (Rob Ellis' old lift from his 1994 Bronc)
37X12.50R15 Super Swamper TSL's
Warn premium manual hubs
Bought in 1999 as my first vehicle when I was 17. First mod was lights, then rims/tires, then lift, then shackle flip.
Bought the motor with the understanding I would need a new transmission since mine was going out. Figured I'd get a big block C6 instead of another AOD. Got the new motor and transmission in and realized my transfer case was shot. Still made it another few hundred miles to the shop to get it rebuilt.
Caught on fire twice
Never really got to wheel it hard, hopefully I'll take it on a trail and really test it out soon.
Sentimental value: Priceless
Closeup_of_drivers_side_shackle.jpg 906 hits | 43.28 KB | Posted: 6/29/03 Hangars from some mid 70's GMC pickup, probably a 3/4 or 1 ton. I couldnt tell, it was flipped on its side at the junkyard and half of it was gone. Drivers side shackle after the flip.
Another_view_of_pass_side_shackle.jpg 879 hits | 54.62 KB | Posted: 6/29/03 I think it looks good when all is said and done. Took me a couple days goin at a leisurely pace to make sure I didnt screw up, but I'm happy with the results. No stupid blocks or shims!
IMG_1599.JPG 801 hits | 63.11 KB | Posted: 8/3/06 Anna Lind caught me humping this girl.
Img_0311.jpg 733 hits | 66.07 KB | Posted: 3/8/04 The new 460 sits in so nice and purdy! I cant help but smile...
Pass_side_shackle.jpg 721 hits | 38.7 KB | Posted: 6/29/03 Passenger side hangar/shackle. I only have 2 bolts in at picture time, the other 2 were installed shortly after. No bolts on the bottom holes, thats my tow hitch frame...dont see a need right now for 2 more bolts.
Img_0317.jpg 719 hits | 89.2 KB | Posted: 3/8/04 Lookin more and more like a real engine now...
Img_0315.jpg 689 hits | 74.52 KB | Posted: 3/8/04 And an even bigger mess over here...
front_CV_joint_angle.jpg 670 hits | 44.38 KB | Posted: 6/29/03 As level as I can get horizontally to give a good idea of what kind of angle to expect with a similar truck after a 6 inch lift.
Maintenance & Modification Logs
This user hasn't added any log entries, yet. Learn more about maintenance logs and how you can create one here.
Rearview Mirror
This shows you the top 15 referring links (where people are coming from to get to this page).
